POLYMER NUTS AND BOLTS

Polymer Nuts and Bolts

 

Vishwakarma Enterprises offers high-quality Polymer Nuts and Bolts manufactured from thermoplastic engineering materials to provide reliable fastening solutions for various industrial applications.

These fasteners are widely used in automotive, electrical, chemical, pharmaceutical, water-treatment and industrial sectors. Made from durable polymer materials, they offer lightweight construction, corrosion resistance and electrical insulation properties, making them suitable for applications where non-metallic fastening solutions are preferred.

Our Polymer Nuts and Bolts combine practical design, easy handling and versatility to meet diverse industrial fastening requirements.

Integrity

Lightweight

Lightweight construction for convenient handling and installation.

Teamwork

Corrosion Resistance

Designed for applications where resistance to corrosion is important.

Excellence

Electrical Insulation

Non-conductive fastening solutions for suitable applications.

Relationship

Versatility

Suitable for different industrial and engineering requirements.

Polymer Nut & Bolt Types

PA6 / PA66 Fasteners

General-purpose mechanical fasteners offering good strength, toughness and wear resistance.

PP Fasteners

Lightweight fasteners with good chemical resistance and moisture resistance.

PTFE Fasteners

Offer excellent chemical resistance, low friction and non-stick properties.

PEEK Fasteners

Known for high mechanical strength, excellent chemical resistance and high-temperature performance.

POM Fasteners

Provide good dimensional stability, low friction and excellent wear resistance.

Polymer Types & Temperature Specification Chart (PC)

Typical indicative values for unfilled grades. Actual specifications vary by manufacturer and grade.

Polymer Type Short Name Continuous Service Temperature Short-Term Temperature
Nylon 6 PA6 80–100°C 140–160°C
Nylon 66 PA66 100–120°C 160–180°C
Polypropylene PP 80–100°C 100–120°C
Polyethylene HDPE 70–80°C 90–110°C
Acetal POM 90–100°C 120–140°C
Polycarbonate PC 110–120°C 130–140°C
PEEK PEEK 240–260°C 280–300°C
PPS PPS 200–230°C 240–260°C

Mechanical and physical properties comparison

Properties PA6 PA66 PP POM PC PEEK PTFE
Density (g/cm³) 1.14 1.14 0.91 1.41 1.2 1.32 2.16
Tensile strength (MPa) 70–85 75–85 30–40 60–70 55–70 90–100 20–35
Flexural strength (MPa) 90–110 100–120 40–55 85–100 85–100 140–170 Low
Water absorption High High Very low Low Low Low Negligible
Impact resistance Good Good Good Good Excellent Excellent Moderate
Chemical resistance Good Good Excellent Good Moderate Excellent Excellent

Chemical Resistance And Application Chart

Test Purpose
Tensile test Pulling strength
Torque test Tightening strength
Thread stripping test Thread durability
Creep test Long-term load resistance
Heat ageing test Temperature performance
Chemical immersion test Chemical compatibility
Dimensional inspection Thread and size accuracy
Impact test Resistance to sudden loading

Advantages & Limitations

Advantages

✓ Lightweight
✓ Corrosion resistance
✓ Electrical insulation
✓ Non-magnetic
✓ Chemical resistance
✓ Easy manufacturing

Limitations

✓ Lower strength than metal
✓ Creep under continuous load
✓ Lower tightening torque
✓ Thermal expansion
✓ Thread stripping risk
✓ Temperature-dependent strength

Important Quality Tests for Polymer Nuts and Bolts

Test Purpose
Tensile test Pulling strength
Torque test Tightening strength
Thread stripping test Thread durability
Creep test Long-term load resistance
Heat ageing test Temperature performance
Chemical immersion test Chemical compatibility
Dimensional inspection Thread and size accuracy
Impact test Resistance to sudden loading

Recommended Material for Manufacturing

Requirement Recommended material
General-purpose nuts and bolts PA66
High mechanical strength PA66-GF
Chemical resistance PVDF / PTFE
High temperature PEEK
Low-cost production PP
Low friction PTFE / POM
High dimensional stability POM / PEEK

Recommended polymer selection by operating temperature

Approximate Continuous Service Temperature

Indicative upper service temperature in °C; actual grades and loading conditions vary.

Polymer Temperature
PP 100°C
PA66 120°C
PC 120°C
PPS 220°C
PEEK 250°C

Recommended Polymer Selection by Temperature

Up to 100°C

PP, PA6, PA66 and POM.

100–150°C

PA66, PC and PVDF, depending on grade.

150–230°C

PPS and selected high-performance polymers.

230–260°C

PEEK and PTFE.

CONTACT US

Looking for quality Polycarbonate Oil Indicators? Get in touch with us.

Cart (0 items)
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Add to cart
  • Description
  • Content
  • Weight
  • Dimensions
  • Additional information
Click outside to hide the comparison bar
Compare